Clock/Timer; Setting The Clock; Setting The Timer; Activating And Deactivating Timer - Philips Audio MC-130 Owner's Manual

STANDBY-ON PROGRAM TIMER
ON
OFF
SOURCE
SELECT
PLAY•PAUSE STOP
PREV NEXT iR

Setting the clock

1
In standby, press CLOCK.
➜ The clock digits for the hours flash.
2
Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
3
Press CLOCK again.
➜ The clock digits for the minutes flash.
4
Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5
Press CLOCK to confirm the time.

Setting the timer

G The system can be used as an alarm clock,
whereby the CD or TUNER is switched on at a
set time. The clock time needs to be set first
before the timer can be used.
G During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
1
In any mode, press TIMER ON•OFF for more
than 2 seconds.
2
Turn VOLUME clockwise (or press SELECT
SOURCE) to select sound source.
3
Press TIMER ON•OFF to confirm your
desired mode.
➜ The selected source
is shown. The clock digits for the hours flash.
4
Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
CLOCK REPEAT SHUFFLE
BAND
or
TUNER
CD TUNER
5
Press TIMER ON•OFF again.
➜ The clock digits for the minutes flash.
6
Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
7
Press TIMER ON•OFF to confirm the time.
➜ The timer is now set and activated.
Activating and deactivating
TIMER
G In standby or during playback, press
TIMER ON•OFF once.
➜ Display shows
TIMER
disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of time. The clock time
needs to be set first before the sleep timer can
be used.
G Press SLEEP on the remote
control once or more.
➜ Display shows SLEEP and
one of the sleep time options
in sequence: 60, 45, 30,15,
SLEEP OFF, 60... if you have
selected a time. Once SLEEP is activated, SLEEP
ON scrolls across the display at repeated
intervals.
G To deactivate, press SLEEP on the remote
control once or more until SLEEP OFF is
shown, or press STANDBY ON on the system
or remote control.
➜ SLEEP OFF scrolls across the display.

Clock/Timer

if activated, and
UFFLE SLEEP
19