Dmz Service; Upnp Settings; Remote Management - Celcom E961 User Manual

DMZ Service

If your PC cannot run network applications through the device, you can set the computer
to access the Internet unlimitedly by configuring the IP address of the computer in the
demilitarized zone (DMZ).
However, the DMZ computer is not protected by the firewall. It is vulnerable to attack and
may also put other computers in the home network at risk.
1. Click .
2. Select Enabled /Disabled for DMZ Status to enable or disable the DMZ service.
3. Enter the local IP address of the computer that is specified as a DMZ host.
4. Click .
Note:
Only one computer can be specified as a DMZ host at a time.

UPnP Settings

The Universal Plug and Play (UPnP) service allows other network users to control your device's
network features to realize the intelligent interconnection.
1. Click .
2. Select Enabled/Disabled for UPnP Status to enable or disable the UPnP service.
3. Click .

Remote Management

The remote web management allows the access and control of the device either from the
home network or from the Internet.
When you are on a trip, you can maintain your device through the remote web
management service. It also allows your ISP to help you solve the device problems from a
remote location.
1. Click .
2. Select Enabled or Disabled for Remote Status to enable or disable the service.
3. Enter the IP address that can access and control your device.
4. Click .
38