Restoring Factory Defaults; Restarting The Device; Viewing The Version Information - Celcom E961 User Manual

Restoring Factory Defaults

If you need to reconstruct the network or you forget the changes of some parameters,
you can choose to restore factory defaults and reconfigure the gateway.
to open the Restore Defaults window, and then click
Click
Note:
After this operation, all configurations
restore to the defaults.

Restarting the Device

to open the Reboot window.
1. Click
2. Click to restart the gateway.

Viewing the Version Information

to display the System Version page. You can view the hardware version,
Click
software version, release time, and the hardware version and software version of the
wireless module, as shown in the following figure.
20
.