Celcom E961 User Manual page 37

• Preamble Type: It has two options: Long and Short. In the case that the client (PC) supports
the Short type, the WLAN can have a better performance if it is Short.
• MAX Associations Limit: It refers to the maximum number of connections. It is used to set
the maximum number of concurrent WLAN users on the gateway. A maximum of 32
clients can connect with the gateway in wireless mode.
• Mode: It refers to the WLAN accessing mode. The gateway can work in two modes, as
shown in the following table. The default value is Access Point.
Mode
Wireless Bridge
Access Point
• Bridge Restriction: It refers to the limitation to the peer MAC addresses. When it is Disabled,
the E961 can access all the remote bridges; when it is Enabled, the E961 can only access
the remote bridges that the addresses are in the address list.
• Bridges: It refers to the physical address of the remote peer bridge. The gateway supports
the point-to-multipoint (PTM) bridge mode, and a wireless gateway can connect four
remote peer bridges at the same time.
• Peer MAC Address: It refers to the physical address list of the remote peer bridges. It
contains a maximum of four physical addresses.
• Link Status: Up shows the successful connection and Down shows the failed
connection.
It is used to connect two or more access points.
The access points meeting the IEEE 802.11b/g standard or
the wireless terminals can connect the wireless gateway.
33
Description