Remote Control
First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt
(RO3/AAA) referring to the imprinted symbols (+/-) in the battery case and put on the battery
cover again. While using the remote control, direct it towards the front side of the receiver. If
the remote control does not work or the chosen function does not work, the batteries are most
probably exhausted and they should be replaced as soon as possible. Please use only the leak
proof batteries. It is best to remove the batteries from the remote unit if you will not be using the
remote control unit for long time.
Connection to the TV
You can connect the set top box to your TV by using the scart socket or HDMI input. Use a scart or
HDMI cable to connect the set top box to your TV. HDMI technology will provide you high quality
picture performance. To get the best HD quality, TV connection via HDMI is advised.
The set top box gives RGB or CVBS output from scart or high definition quality from HDMI output.
1.
3.
English - 7 -
2.