Navigating The Whole Channel List; Favorite List; Program Guide (Epg); Picture - Telefunken TF-9820T2HD Manual

Navigating The Whole Channel List

In the channel table " "/" " buttons serve for
moving the focus to the previous or next channel.
To watch a specific channel, highlight it using "
"/" " buttons and press OK. Then the name and
number of the selected channel will be displayed
on the screen. If the selected channel is password
protected, a pop up menu will be displayed. If the
correct code is entered, the selected channel can
be watched. Also you can select another channel
by navigating with " "/" " buttons. The scroll Bar
in the middle of the screen shows relative position
of the currently visible channels with respect to the
whole list.

Favorite List

Favorite channel list provides an easy way
to group programmes in a customizable way.
Using the Program>Program Edit menu you
can add or remove channels to the favorite list.
Press FAV button on the remote to open
Favorite List. You can change the position of
the channels in the list. Highlight the desired
channel and press the RED button. Use the "
"/" " buttons to reposition the channel and press
OK button to confirm.

Program Guide (EPG)

To display Program Guide press the EPG button
on the remote. The Program Guide can be
reached from the Program>EPG menu. You can
get Information of the programs weekly by means
of 7-DAY–EPG.
• Press " " / " " buttons to navigate through
channels.
• Press " " / " " buttons to navigate through
the events of the selected channel.
Please note that event information is updated
automatically. If there is no event information
available, only program names and dates are
displayed.
Set Reminder/ Cancel Reminder
Press OK or INFO button to open Schedule
menu. You can add reminders for selected events
using this menu options. You can also edit or
delete previously added reminders on the list.
Highlight a reminder from the list. Press GREEN
button to edit and BLUE button to delete the
selected reminder. Press EXIT/BACK button to
return to the Program Guide menu.

Picture

Press the MENU button and select Picture from
the list using the " " / " " buttons on the remote.
Press OK or " " button to enter.Two options are
available: Aspect Ratio, Resolution.
Aspect Ratio
The channels can be broadcast in a widescreen
format which must be output differently to
normal and wide screen set top box sets.
This function defines the screen format of the
connected TV to enable broadcasts' being
displayed correctly.
You can set Aspect Ratio between Auto, 16:9
PillarBox, 16:9 Pan&Scan, 4:3 Letter Box, 4:3
Pan&Scan, 4:3 Full or 16:9 Wide Screen.
Resolution
By pressing " "/ " " on the remote control, you can
set the HDMI resolution as 576i, 576P, 720P, 1080i
or 1080P(50Hz).

Channel Search

Press the MENU button and select Channel
Search from the list using the " " / " " buttons
on the remote. Press OK or " " button to enter.
Three options are available: Auto Search,
Manual Search, Antenna Power.
To start an automatic channel scan highlight
Auto Search and press the OK or " " button.
To start a manual channel scan highlight Manual
Search and press the OK or " " button. On
the next screen you can set the Frequency
Channel and then press OK to start the
search. On this screen you can also see the
Frequency, Bandwidth,signal level and signal
quality values.

Time

Select Time in the main menu to configure time
settings. Press OK or " " button to enter.
Use " " or " " buttons to highlight the desired
menu option. Press " " / " " buttons to set.
Time Offset can be set as Auto or Manual if
Auto is selected, Time Zone option will not be
available to be set. To set Time Zone option
Time Offset should be set as Manual.
Country Region option can not be set and
shows the current region.
English - 11 -