Telefunken TF-9820T2HD Manual

Digital high definition terrestrial receiver

Advertisement

DIGITAL HIGH DEFINITION TERRESTRIAL RECEIVER
TF-9820T2HD

Advertisement

Table of Contents
loading

Summary of Contents for Telefunken TF-9820T2HD

  • Page 1 DIGITAL HIGH DEFINITION TERRESTRIAL RECEIVER TF-9820T2HD...
  • Page 2: Table Of Contents

    Contents Features ..............2 Accessories ............2 Safety Precautions ..........3 Markings on the Product......... 4 Overview of the Remote Control ......5 Connections............6 Remote Control ............7 Connection to the TV ..........7 Power Connection ..........8 Power On-Off ............8 Antenna Connection ..........
  • Page 3: Features

    Features Accessories • DVB Teletext • Channel capacity: 400 • DVB 7 days event information (7 days EPG) • CVBS support and L/R headphone jack • Last watched channel saving Batteries • Automatic search for all channels 2 X AAA • Timer function programmable via EPG Remote Controller • Favourite list • HDMI output: 576i, 576p, 720p, 1080i, 1080p.
  • Page 4: Safety Precautions

    circulation. Please do not put the set into Safety Precautions closed areas and do not cover it. Power Source • Please avoid the contact of the set with water Always use the provided AC adaptor. or humidity. Do not put into operation near Operate only from the power source specified bath, swimming pools.
  • Page 5: Markings On The Product

    Markings on the Product The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons. Class II Equipment: This appliance is designed in such a way that it does not require a safety connection to electrical earth.
  • Page 6: Overview Of The Remote Control

    Overview of the Remote Control 1. Standby/On 2. Numeric buttons 3. Switches between TV and Radio mode 4. Mute 5. Volume Up / Down 6. Menu on-off 7. Navigation buttons (Up/Down/Left/Right) 8. OK/ confirm/ Opens channel list 9. Back 10. Media Browser 11. Pressing once opens the info banner. Pressing twice extends the info menu screen.
  • Page 7: Connections

    Connections FRONT VIEW TF-9820T2HD 1. POWER/STAND-BY button 2. USB INPUT: To connect USB storage devices for media playback BACK VIEW ANTENNA IN SPDIF 5VDC 50mA 1. ANTENNA IN : Aerial input 2. HDMI OUTPUT : HDMI output connection 3. Optical Audio Out: You can use this connector to output the digital audio to an external sound device.
  • Page 8: Remote Control

    Remote Control First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt (RO3/AAA) referring to the imprinted symbols (+/-) in the battery case and put on the battery cover again. While using the remote control, direct it towards the front side of the receiver. If the remote control does not work or the chosen function does not work, the batteries are most probably exhausted and they should be replaced as soon as possible.
  • Page 9: Power Connection

    Power Connection IMPORTANT: This set top box is designed to operate on 12V DC. For this, an adaptor is used which gives 12 V voltage. Connect this adaptor to a system that supplies 220-240 V AC, 50/60Hz. After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set to the mains.
  • Page 10: Usb Connection

    USB Connection • You can connect a USB hard disc drive or USB memory stick to your box by using the USB input. This feature allows you to play files stored in a USB drive. • 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported. IMPORTANT ! • You may back up your files before making any connections to the box in order to avoid any possible data loss. Note that manufacturer will not be responsible for any file damage or dataloss.
  • Page 11: First Time Installation

    First Time Installation Program IMPORTANT: Ensure that the aerial is con- Press MENU button to view the main menu. Select nected before switching on the set top box Program item by using / button. Press OK or for the first time. button and highlight Program Edit.
  • Page 12: Navigating The Whole Channel List

    Navigating The Whole Channel List Picture In the channel table “ ”/“ ” buttons serve for Press the MENU button and select Picture from moving the focus to the previous or next channel. the list using the “ ” / “ ” buttons on the remote. To watch a specific channel, highlight it using “...
  • Page 13: System

    A sleep timer can be set using the Sleep item or “ ” button to reset to factory default settings. in the menu. Using this item you can set the You should enter the correct password first. To box to switch to sleep mode after a selected confirm and continue press OK button or press period of time.
  • Page 14: Osd Message

    Viewing JPG Files Subtitle Specific: Set the subtitle font size. Select Photo as media type and press OK Subtitle BG: Set the subtitle background color. button. Select the folder that contains image Subtitle Font Color: Set the subtitle font color. files if they are not installed in the root folder of OSD message the USB device. Only the available image files...
  • Page 15: Displaying Text

    Demodulation: Displaying Text • Symbolrate: COFDM with 2K/8K FFT mode. Some channels have teletext pages broadcast • Modulation: 16-QAM - 64-QAM FEC for all DVB along with the television programme. modes (automatically found), 256-QAM for DVB-T2. Press button to activate teletext pages (if Video: available).
  • Page 16: Trouble Shooting

    Trouble Shooting Trouble Possible Reasons What To Do Adaptor cable is not Check if the adaptor cable is The standby led is not lit. connected. plugged into the power socket. Check the signal cable and A/V No picture or sound. No signal or weak signal.
  • Page 17 Conformity Information The receiver complies with the following standards and norms: In regard to the conformity with fundamental requirements and relevant regulations, this device complies with EMC Directive 2014/30/EU as well as with Directive 2014/35/EU for Low Voltage Equipment. Ecodesign requirements for energy-related products (Directive 2009/125/EC according to Implementing Regulation No.
  • Page 18 For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. TELEFUNKEN Licenses GmbH Imported by: Bockenheimer Landstraße 101...

Table of Contents