Osd Message; No Signal; Channel Navigation - Telefunken TF-9820T2HD Manual

Viewing JPG Files
Select Photo as media type and press OK
button. Select the folder that contains image
files if they are not installed in the root folder of
the USB device. Only the available image files
will be displayed.
OK button: Views the selected picture in full
screen. After pressing OK button following
operations can be done:
Red button: Zoom
Green button: Rotate
Back: Back to the previos folder.
button: Starts the slideshow with all pictures
in the folder.
Blue button: Preview all pictures in thumbnails
view.
Playing Video Files
Select Video as media type and press OK
button. Select the folder that contains video
files if they are not installed in the root folder of
the USB device. Only the available video files
will be displayed.
button: Play the selected video.
button: Stop the playing video.
button: Pause/resume playing video.
buttons: Rapid advance.
buttons: Rapid reverse.
Back: Back to the previos folder.
Red button: Switch between Preview and Full
screen.
Photo Configure
Select USB option from the main menu. Then
select Photo Configure and press OK or " "
button. The following options are available:
Slide Time: Specify a time interval for each
slide. This option can be set between 1 and 8
seconds.
Slide Mode: Set the slide mode as Random or
as desired value between 0 and 59.
Aspect Ratio: Set as Keep in order to keep
your photo's aspect ratio. Set as Discard to
let the image fit to screens aspect ratio.Movie
Configure
Select USB option from the main menu. Then
select Movie Configure and press OK or " "
button. The following options are available:
Subtitle Specific: Set the subtitle font size.
Subtitle BG: Set the subtitle background color.
Subtitle Font Color: Set the subtitle font color.

OSD message

No Signal

When the box receives no signal (e.g. the
antenna cable is disconnected), "No signal"
message will be displayed on the screen.

Channel Navigation

Channel Buttons: Pressing P+ / P- buttons will
swich to the next or previous channel in the list.
Numeric Buttons: Pressing a numeric button
will activate a small digit entry window on the
upper right corner of the screen. After a digit is
entered, the box will wait for 5 seconds in case
you enter another one. If no digit is entered
within these 5 seconds, the box will switch to
the entered channel number.
If a number is entered, to which no channel is
assigned "Invalid Channel" message will be
displayed on the screen.
Each time the box switches to the desired
channel or Info (İ) button is pressed an
information banner will be displayed on the
bottom side of the screen. The bar in the middle
of the banner indicates the duration of the
current program. On the channel info banner
there are:
• Channel number.
• Name of the channel.
• Programme duration bar.
• Current event name, next event name, and
their 'start' and 'end' times.
When switching to a locked channel, password
is requested. The channel can be watched only
if the correct password is entered. To skip this
channel, use P+ / P- buttons.
When V+ / V- buttons are pressed, volume level
bar is displayed. This shows the present volume
level graphically.
When the MUTE button is pressed, a mute
symbol is displayed on the screen. This symbol
won't disappear until the MUTE button or is V+/V-
buttons are pressed. The MUTE button won't work
if a menu is being displayed on the screen.
English - 13 -