I-Trac AS2000 Plus User Manual page 11

Close the power off alert Command: 010 + user password
eg: 0100000
Reply: POWER ALARM OFF
8.8. Power cut(Available for MT1C MT1X A1X only)
Cut power: 940+password
Eg: 9400000
Enable power: 941+password
Eg:9410000
8.9. Time Zone
Command: 896 + user password + D + NN
Eg: 8960000E08
Reply : TIME ZONE SET OK,CURRENT：E8.
Note : D takes E or W to indicate east or west time zone respectively. N takes a 2-digit number (1-12)
to indicate time zone
Number.
8.10. Over speed Alarm
Command : 122+user password+space+X
Eg: 1220000 120
Reply: SET RATE LIMIT:120
Close command : 1220000 0
Note : X is speed benchmark value, which is an integral number. unit is KM/H with defined domain
of [0, 999].
8.11. Set Defence Alarm ON/OFF
Set Up Defence：712+password
Eg：7120000
Reply：SF OK
Set Down Defence：713+password
Eg： 7130000
Reply：CF OK
8.13. Set ACC alarm(available for MT1 MT1C MT1X MT1Z A1X)
Turn on acc alarm SMS: 886+user password
Eg: 8860000