Toshiba 34AX9UH Service Manual page 22

• Use the MANUAL SEARCH (SEARCH or >>>) function if desired channels cannot be preset with the ASM or if you
would like to preset channels to specific position numbers one by one.
• It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH (SEARCH or >>>)
and SKIP functions.
To preset channels (Manual search) and skip unnecessary position numbers
Manual search (SEARCH or >>>)
1
Select a desired position number with the CH
direct select buttons.
2
Press the MENU button repeatedly to call up the SET
UP menu on the screen.
3
Press the MENU t/s (or CH t/s) buttons to move the
cursor (S) to "SEARCH or >>>".
4
Press the MENU –/+ (or; –/+)buttons to start search-
ing. The MENU – (or; –) button searches for lower-
numbered channels; the MENU + (or; +) button for
higher-numbered channels.
Repeat this process until you can get the desired chan-
nel.
5
When the desired channel is shown, press the MENU
t/s buttons (or CH t/s) to move the cursor (S)
to " ".
6
Press the MENU + (or; +) button to store the chan-
nel at the current position.
7
When you desire to store another channel at another
position, move the cursor (S) to "POSITION" with the
MENU t/s (or position t/s)buttons and select a de-
sired position number with the MENU –/+ (or; –/
+)buttons. Then, press the MENU t/s (or CH t/s) but-
tons to move the cursor (S) to "SEARCH or >>>" and
repeat the steps 4 to 7. Or, repeat the steps 1 to 7 after
the display disappears.
To skip a CH position number
or
After presetting the channels, you may skip unnecessary po-
sition numbers so that only the channels you want to watch
are selected.
1
Select the position number to be skipped with the CH
buttons or direct select buttons.
2 Press the MENU button repeatedly to call up the SET
UP menu on the screen.
3 Press the MENU t/s (or CH t/s) buttons to move the
cursor (S) to "SKIP".
4 Press the MENU –/+ (or; –/+) buttons to select "SKIP
ON".
5 Press the CALL button to turn off the SET UP menu
display.
Select the position number to be skipped with the di-
rect select buttons. The * mark appears to the left of
the position number.
The position number will then be skipped when you
select channels with the CH
To restore a skipped CH number
1 Select the CH position number you want to restore with the
direct select buttons.
2 Press the MENU button to call up the SET UP menu display
and press the MENU t/s (or CH t/s) buttons to move the
cursor (S) to "SKIP".
3 Press the MENU –/+ (or; –/+) buttons to select "SKIP
OFF".
.
* Please refer to owner's manual.
– 22 –
buttons.