Advertisement
Troubleshooting
WARNING: TO REDUCE RISK OF PERSONAL INJURY, UNPLUG CLEANER BEFORE SERVICING.
PROBLEM
Cleaner won't run
Cleaner won't pick-up/loss of suction
9
Dust escaping from cleaner
Cleaner tools won't pick up
VAX CARE: 0870 6061248
POSSIBLE REASONS
1. Power lead not firmly plugged into socket.
2. Blown fuse or tripped circuit breaker.
3. Needs service.
1. Dust canister not installed correctly.
2. Dust canister full.
3. Blocked filter.
4. Cleaning head blocked.
1. Dust canister full.
2. Dust canister not installed correctly.
3. Hose not installed correctly.
4. Filter not installed correctly.
1. Hose blocked.
2. Dust canister full.
3. Filter blocked.
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or circuit breaker in home.
Replace fuse or re-set circuit breaker.
3. Call VAX Care on 0870 6061248.
1. Review dust canister removal and
replacement.
2. Empty dust canister.
3. Remove filter and clean.
4. Remove nozzle access window; clear
obstruction OR check hose and clear
obstruction.
1. Empty dust canister.
2. Review dust canister removal and
replacement.
3. Review hose installation.
4. Review filter installation.
1. Remove hose and tools and clear
obstruction.
2. Empty dust canister.
3. Clean or replace filter.
Advertisement
