Packing Condition (Incoming Serial Data Packing Condition); Ethernet Data Tagging Option - Wiznet WIZ630wi User Manual

6.3 Packing Condition (Incoming serial data packing condition)

Type
Time
Size
Character
Inactivity Time:
H/W CMD switch

6.4 Ethernet Data Tagging Option

This option is used to help serial device to identify who is the received serial data's source: the
received serial data comes from Main Port or Aux Port.
Type
Status
Main Port
Aux Port
© Copyright 2012 WIZnet Co., Inc. All rights reserved.
Data packing until the set time and then sent to server after the set time.
Data packing until the set size and then sent to the server.
Data packing until the set character and then sent to the server.
TCP/IP connection is discontinued if there is neither serial data nor network
data during the set time.
-. Enable/Disable the H/W CMD switch pin.
-. H/W CMD switch pin is the switch for sending commands from CPU to
WIZ630wi.
Enable or disable this option (Checked : Enable, Un-Check : Disable)
Before sending data from Main port to serial port, WIZ630wi added a TAG
in the front of payload.
For example:
In-come LAN Data : "abcdegf"
Output data to Serial Port : "!MAIN!abcdegf"
Before sending data from Aux port to serial port, WIZ630wi added a TAG in
the front of payload.
For example:
In-come LAN Data : "abcdegf"
Output data to Serial Port : "!AUX!abcdegf"
Description
Description
35