Wiznet WIZ630wi User Manual page 25

Hide thumbs Also See for WIZ630wi:
Table of Contents

Advertisement

When a data that is larger than the threshold size, it can be sent RTS/CTS. Smaller
threshold size may enable more stable wireless communication; however the maximum
RTS Threshold
speed is lower. Smaller threshold size is recommended in case of more wireless stations
are connected at the same time. The setting range is 1~2347.
Controls the range of wireless radio being sent. The range of wireless radio being sent
Tx Power
gets larger as the value is larger.
If user enables Short Preamble, performance might slightly improve. However, the
Short Preamble
compatibility with wireless LAN card when connecting could decrease. It is
recommended to disable Short Preamble for best compatibility.
The performance of wireless station connected to 11g can be improved by enabling
Short Slot
Short Slot. However, it is recommended to disable Short Slot if there is a wireless station
with unstable connection.
The wireless speed can be maximized by enabling this function. However, it is
Tx Burst
recommended to disable this function for stable connection when numerous stations are
connected together.
Pkt_Aggregate
Numerous packets can be transmitted in one MPDU by enabling this function.
802.11H
Supported only for 802.11a.
Setting for country code.
Country Code
Example: KR(Republic of Korea), US(United State), FCC(Europe), JP(Japan), FR(France),
ES(Spain)
WMM
Decide to whether or not use WMM function.
APSD
Decide to whether or not use Power Saving Mode.
DLS
Decide whether or not use DLS (Direct Link Setup) function.
WMM Parameter
If WMM is enabled, set the value for WMM Parameter.
Multicast-to-
Decide whether or not use Multicast function.
Unicast
25
© Copyright 2012 WIZnet Co., Inc. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents