Change The Privacy Mode Pin/Passcord - Philips D6350 Extended User Documentation

4
Select [Exception], then you can select
from these two options:
• Select [On/off] > [On]/[Off] to
activate/deactivate the silent mode,
then press [OK] to confirm.
Select [Ring delay], then select an
•
option.
5
Press [OK] to confirm.
» The setting is saved.
Note
•
If [Exception] is set to [On] and [Ring delay] option
is selected, the handset rings only after length of ring
delay selected is reached.
•
Make sure that the contact under the [Set exception]
option of the phonebook menu is set to [On] before
you can exclude this contact from the silent mode.
Change the privacy mode
PIN/passcord
1
Select [Menu].
2
Press / to select , then press
[Select].
3
Enter the old PIN/passcode. The default
PIN is 0000. Then press [OK] to confirm.
4
Select [Change PIN], then press [OK] to
confirm.
5
Enter the new PIN/passcode, then press
[OK] to confirm.
6
Enter the new PIN/passcode again, then
press [OK] to confirm.
» The setting is saved.
EN
29