Hohner FU 252 Operating Manual page 2

Signal converter for frequency - analog / serial
Product features:
 Input frequency range from 0.1 Hz to 1 MHz for full scale analog output
 Conversion time only 1 ms. (f > 2 kHz)
 Analog output with +/- 10 V or 0 resp. 4 to 20 mA
 Polarity of analog signal changes with change of the direction of rotation
 Suitable for conversion of quadrature signals (A/B) as well as single-channel
signals, with all HTL or TTL or RS422 formats and levels
 Suitable for conversion of the sum, the difference or the ratio of two frequencies
 RS232 or RS485 interface for serial readout of the input frequencies
 Programmable digital filters and programmable linearization curves
 Easy to set up by simple TEACH procedure, or by PC operator software
motrona GmbH, Zeppelinstraße 16, DE - 78244 Gottmadingen, Tel. +49 (0) 7731 9332-0, Fax +49 (0) 7731 9332-30, info@motrona.com, www.motrona.com
Hohner Elektrotechnik GmbH
Gewerbehof 1
59368 Werne
Phone +49 - 2389 - 9878-0
Fax +49 - 2389 - 9878-27
E-Mail info@hohner-elektrotechnik.de
Web www.hohner-elektrotechnik.de
www.hohner-elektrotechnik.de
FU 252
2