Download Print this page

Pre-Installation Recommendations - Gamber Johnson 7160-0883-00 Installation Instructions

Cradle dell rugged laptop

Advertisement

PRE-INSTALLATION RECOMMENDATIONS

Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all
electronic and software issues are resolved prior to installation:
1.
Make sure the computer is operational by itself.
2.
Insert computer into the cradle and verify that the computer is operating in
the dock.
3.
Interconnect entire assembly and verify start-up of all components,
including other equipment (printers, modems, scanners, etc.)
Gamber-Johnson recommends positioning of all mounts and equipment in the
vehicle prior to the actual install to verify that mounting locations are safe and
practical.
IMPORTANT SAFETY INFORMATION FOR INSTALLERS
Safety is dependent on the proper installation and servicing of this cradle. It is important to
read and follow all instructions before installing this product.
To properly install a Gamber-Johnson cradle you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and
service of aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the cradle.
Opening the cradle will void the product warranty.
During Installation:
DO NOT connect this cradle to the vehicle battery until:
1.
All other electrical connections are made
2.
Mounting of all components is complete
3.
Verification that no shorts exist in the entire system
DO NOT install equipment or route wiring or cords in the deployment path of any air bag.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of
anything that could be damaged.
CAUTION: If wiring is shorted to the frame, high current conductors can cause hazardous
sparks resulting in electrical fires or flying molten metal.
After installation:
Test the cradle to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING: Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death.
2 / 5

Advertisement

loading

This manual is also suitable for:

7160-0883-03