Table of Contents
Advertisement
Chapter 12
PC Client Software
Installing PC Software
The software is only for Windows 7, Vista, XP, but can not be guaranteed to run on these systems.
•
1. Connect the data cable to your phone and your computer.
Notes:
Plug the smaller end of the cable into the connection jack at the left side of the phone, and the
•
bigger end into the USB port of the computer.
The USB lead is unique and should not be used for other devices. (It is not the same as digital
•
camera leads)
2. Your computer will recognize the handset and start the Join ME installation process automatically.
Notes:
• If the system does not launch installation automatically, you can run the installation program in
path of My Computer> JoinME.
3. Follow the prompts to complete the software installation. All required drivers are installed at this time.
Notes:
Once installed the JoinME icon will appear on the desktop.
Uninstalling PC Software
1. Select Start > Program > Join ME > Uninstall Join ME.
Tips:
Before uninstall, please close the program.
2. Complete the uninstallation according to the prompt information.
Running PC Software
Make sure that you connect the mobile phone to your PC correctly.
1. Switch your phone on.
2. Double click the icon
3. You will be prompted to connect your device, select
4. Your phone will now automatically synchronize the content from the handset, and the Join ME is now
ready to use with your connected device.
The icon
on the desktop.
will be on the Windows status bar if the connection is successful when the
Confidential and Proprietary Information of ZTE CORPORATION 35
and click Connect.
F953
Advertisement
Table of Contents
