Table of Contents
Advertisement
Adding a Contact
1. In standby mode, tap Contacts icon.
2. Tap New icon.
3. Enter the information of contact, such as name, number, etc.
4. Tap Save icon to save the new contact.
Searching a Contact
1. In standby mode, tap Contacts icon.
2. Tap Search icon.
3. Enter the first letter and the phone shows all contacts starting with such a letter.
Eg. To search "John", press the key "5" once for 'J'. All names starting with 'J' are displayed.
Refine the search by entering a subsequent letter that can occur anywhere in the name.
4.
Eg. 'Jn' will find 'John' and 'Julian' but not 'James'
Chapter 6 Bluetooth
Your phone includes Bluetooth used to connect your handset to wireless headsets and hands free car kits.
You can also transfer files between your phone and other Bluetooth devices such as another phone or a
laptop. Not all applications or devices can be supported as Bluetooth is an open forum and different
manufacturers adopt different standards and implementation.
Enabling Bluetooth
The default Bluetooth function is disabled for your phone.
If you enable Bluetooth and power off the phone, this function will be disabled. After you restart the
phone, this function will be enabled automatically.
1. In standby mode, press Menu Key to enter main menu.
2. Select Bluetooth > Bluetooth On/Off to open or close Bluetooth function.
Notes:
Start Bluetooth to allow your mobile phone to be found by other compatible devices
You can send files between your phone and another Bluetooth device.
My Devices
1. In standby mode, select Menu Key to enter main menu.
2. Select Bluetooth > Find Device search the available Bluetooth device.
3. Or select Bluetooth > My Device to enter the Bluetooth device displayed list.
4. Enter the pass code when asked for permission to connect to the device. After the paired device
verifies the pass code, the device will be added successfully.
26 Confidential and Proprietary Information of ZTE CORPORATION
Advertisement
Table of Contents
