Quick Menu - Vox LED SMART39ST2880 Operating Instructions Manual

Sorting Channel List
You can select broadcasts to be listed in the channel
list. To display specific types of broadcast, you
should use Active channel list setting. Select Active
channel list from the Channel list menu by using "
" or " " button. Press OK button to continue.
You can select a network type option from the list
by using " " or " " and OK buttons.

Quick Menu

The Quick Settings menu allows you to access some
options quickly. This menu includes Power Save Mode,
Picture Mode, Equalizer Settings, Favourites, Sleep
Timer, FollowMe TV, FollowMe TV to DMR ,CEC RC
Passthrough and Information booklet options. Press
Quick Menu button on the remote control to view the
quick menu. See the following chapters for details of
the listed features.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe
TV feature. Install the appropriate Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note: This application is not compatible with all mobile device.
FollowMe TV to DMR
This feature allows video streaming from your TV
to another TV or mobile devices, using proper
applications (e.g. UPnP - Universal Plug and Play -
applications like BubbleUPnP). Activate FollowMe TV
to DMR and timeshifting starts. Press the red button
and device selection menu will be displayed. Choose
your device and press OK.
Note: FollowMeTV and FollowMe TV to DMR features
work correlated with the PVR feature and requires a
connected USB storage device with FAT32 format and
enough space in it. HD channels are not supported
and both of the devices must be connected to the
same network.
E-Manual
You can find instructions for your TV's features in
the E-Manual.
To use E-Manual, press to the Info button while main
menu is displayed on the screen.
By using the navigation buttons select a desired
category. Every category includes a different topics.
Select a topic and press OK to read instructions.
To close the E-Manual screen press the Exit button.
Note: The contents of the E-Manual may vary according to
.
the model.
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Other Settings menu
under Settings menu should be set as Enabled
at first. Press the Source button and select the
HDMI input of the connected CEC device from the
Source List menu. When new CEC source device
is connected, it will be listed in source menu with
its own name instead of the connected HDMI ports
name(DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source
has been selected.
To terminate this operation and control the TV
via the remote again, press and hold the "0-Zero"
button on the remote control for 3 seconds. Or
press Q.Menu button on the remote, highlight the
CEC RC Passthrough and set as Off by pressing
Left or Right button. This feature can also be
enabled or disabled under the Settings/Other
Settings menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to
replace other cables between the TV and the audio
system (A/V receiver or speaker system).
When ARC is active, TV does not mute its other
audio outputs automatically. So you need to
decrease TV volume to zero manually, if you want
to hear audio from connected audio device only
(same as other optical or co-axial digital audio
outputs). If you want to change connected device's
volume level, you should select that device from
the source list. In that case volume control keys are
directed to connected audio device.
English - 11 -