JVC RX-F10S Service Manual page 11

www.freeservicemanuals.info
3.10 Removing the speaker terminal board
(See Figs.13 and 14)
• Remove the top cover and DSP board.
(1) From the top side of the main body, disconnect the wires
from the connectors (CN301, CN701, CN725, CN801) on
the speaker terminal board. (See Fig.13.)
(2) From the back side of the main body, remove the two
screws N attaching the speaker terminal board. (See
Fig.14.)
(3) Take out the speaker terminal board from the main body.
3.11 Removing the scart board
(See Figs.13 and 14)
• Remove the top cover and DSP board.
(1) From the top side of the main body, disconnect the card
wires from the connectors (CN513, CN514) on the scart
board. (See Fig.13.)
(2) From the back side of the main body, remove the two
screws P attaching the scart board. (See Fig.14.)
(3) Take out the scart board from the main body.
Published in Heiloo, Holland.
Speaker terminal board
Scart board
Wires
Card wire
CN514
CN725
CN513
Card wire
Fig.13
Scart board
P
Fig.14
4/22/16
CN801
CN701
CN301
Speaker
terminal board
N
(No.MB206)1-11