Protecting The Heating Installation Against Frost; Troubleshooting; Detecting And Rectifying Faults; Displaying The Status Codes - Vaillant ecoTEC sustain 24 Operating Instructions Manual

5 Troubleshooting

4.9 Protecting the heating
installation against frost
4.9.1 Frost protection function
Caution.
Risk of material damage due
to frost.
The frost protection function
cannot guarantee flow through
the entire heating installation,
which means that parts of the
heating installation may freeze
and therefore become dam-
aged.
▶
During a period of frost, en-
sure that the heating installa-
tion remains in operation and
that all rooms are sufficiently
heated, even when you are
away.
To keep the frost protection devices active,
you should switch your product on and off
using the controller, if one is provided.
If the heating flow temperature falls be-
low 5 °C when the on/off button is on, the
product comes into operation and heats
the circulating water to approx. 30 °C on
both the heating side and the hot water
side (if available).
4.9.2 Draining the heating
installation
When the unit is switched off for an exten-
ded period, frost protection can be guar-
anteed by completely draining the heating
installation and the product.
▶
Consult a competent person about this.
14
5 Troubleshooting

5.1 Detecting and rectifying faults

▶
If faults occur or fault messages (F.XX)
are displayed, proceed as set out in the
tables in the appendix.
▶
If the product is not functioning cor-
rectly, contact a competent person.

5.2 Displaying the status codes

1. Press and
◁
S.XX is shown in the display, fol-
lowed by the heating flow temper-
ature and the internal system pres-
sure.
2. Look up the meaning of the status
codes.
Status codes – Overview (→ Page 17)
3. Press .
◁
The display switches to the basic
display.

6 Care and maintenance

6.1 Maintenance

An annual inspection of the product carried
out by a competent person is a prerequis-
ite for ensuring that the product is perman-
ently ready and safe for operation, reliable,
and has a long working life.

6.2 Caring for the product

Caution.
Risk of material damage
caused by unsuitable clean-
ing agents.
▶
Do not use sprays, scouring
agents, detergents, solvents
or cleaning agents that con-
tain chlorine.
▶
Clean the casing with a damp cloth and
a little solvent-free soap.
Operating instructions ecoTEC sustain 0020253095_01
at the same time.