Panasonic CF-30 Series Supplementary Instructions Manual page 7

NOTE
To use wireless communication, set the wireless device setting ([Wireless LAN]
/ [Bluetooth] / [Wireless WAN]) to [Enable] (default) in the [Advanced] menu of
the Setup Utility.
It may take some time to turn off wireless communication after switching the
wireless switch to off.
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter standby or hibernation immediately after turning
on/off the switch.
Do not turn on/off the switch while Windows is starting up.
When you set [Wireless Switch] to [Disable] in the [Advanced] menu of the
Setup Utility (
Utility"), the Wireless Switch Utility icon will not appear in the notification area.
All wireless equipment (Wireless LAN, Bluetooth, HSDPA/UMTS) will remain
ready irrespective of the wireless switch setting.
To check the wireless communication status
Place the cursor over the Wireless Switch Utility icon (
tion area. A tooltip appears.
Reference Manual for the computer "Wireless Switch
or ) on the notifica-
7