Download
Share
Print this page
  1. Manuals
  2. Brands
  3. InterVac Manuals
  4. Vacuum Cleaner
  5. IVD660-F
  6. Installation and operating manual

InterVac IVD660-F Installation And Operating Manual

120 volt vacuum
Hide thumbs Also See for IVD660-F:

Advertisement

Quick Links

Download this manual
THE COMPACT CENTRAL VACUUM SPECIALIST
INSTALLATION and OPERATING MANUAL
TYPE: 120 VOLT
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR INTERVAC
PRODUCT,
This manual must be read and understood before installation, adjustment, service or maintenance is performed.
This unit should be installed by a qualified technician. Modification of this product can be extremely hazardous
and could result in personal injury or property damage.
Phone 772-463-1400 • USA & Canada toll free 888-499-1925
www.
intervacdesign
IVD660-F
IVD660-H
DO NOT RETURN THIS PRODUCT TO THE STORE OR DEALER
PLEASE CALL US DIRECT 1-888-499-1925
WARNING:
InterVac Design Corp., Palm City, FL 34990
2939 SW 42nd Avenue
.com •
e-mail: orders@intervacdesign.com
IN-WALL INSTALLATION
SURFACE MOUNTED
Owner read carefully.
Instructions must stay with unit.
RECORD THIS INFORMATION FOR
FUTURE REFERENCES
MODEL NUMBER _______________________
DATE OF PURCHASE ___________________
PLACE OF PURCHASE__________________
Manual # M13
date: 1-6-17
rev.:
66XF

Advertisement

loading
Need help?

Need help?

Do you have a question about the IVD660-F and is the answer not in the manual?

Questions and answers

Related Manuals for InterVac IVD660-F

Summary of Contents for InterVac IVD660-F

  • Page 1 IVD660-F TYPE: 120 VOLT IN-WALL INSTALLATION IVD660-H SURFACE MOUNTED IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR INTERVAC PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE OR DEALER PLEASE CALL US DIRECT 1-888-499-1925 WARNING: Owner read carefully.

  • Page 2: Important Safety Instructions

    InterVac or an authorized Do not step on the hose or pull the hose forcibly. service dealer for examination and repair.

  • Page 3: New Construction Installation

    Specification: 120 Volt, 12.5 Amp 50/60Hz, Weight 8 lb Parts List: Model IVD660-F MODEL IVD660-H Mounting frame for 2x4 wood studs, 16” on center Steel vacuum hanger + screws 6 screws for installing frame Left and right side panel Slider, pipe connetion...
  • Page 4 Model 660-H vacuum replacement installation Surface mounted installation with Power Cord attached To remove side panels, loosen the 4 screws inside the vacuum chamber 1) Remove the door from the vacuum, by pulling from the top on the curved bracket. inside you will find: 1 black flanged fitting with 4 screws 1 white reducer...
  • Page 5 Model IVD 660H Model IVD 660H BACK VIEW OF IVD660-H VACUUM TOP PLATE InterVac Design Corp. Palm City, Florida. 3-1-2017 patent pending 2 1 16 1 1 4 WITH TOP WITHOUT PLATE AND TOP PLATE...
  • Page 6 WITH TOP WITHOUT PLATE AND TOP PLATE SIDE PANELS AND SIDE ATTACHED UPPER COVERS MOUNTING HOLE MOUNTING BRACKET SIDE PANEL WITH RUBBER PADS SIDE PANEL WITH RUBBER PADS TRACK FOR LOW VOLTAGE WIRE interVac Design Corp. Palm City, Fl. 3-1-2017...
  • Page 8 Model 660-F new construction installation In-wall installation with Power Cord attached 2 studs have to be on 16” centers. 120 volt 15 amp power receptacle should be in reach of vacuums electrical cord. NOTE: if the studs are on 24 centers, ask the carpenter to install another stud. 2x4 stud wall, without dry-wall installed.
  • Page 9 Model 660-FR new construction installation In-wall installation with 14 gage Romex Cable GROUNDING INSTRUCTIONS: This appliance must be connected to a grounded metal, permanent wiring system; or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance. WARNING: Disconnect all electrical power to the wall area before installing! An electrician must install the Romex Cable:...
  • Page 10 PLEASE NOTE: NORMALLY A CENTRAL VACUUM CLEANER IS STARTED WITH THE VACUUM VALVES AROUND THE HOUSE WALLS. WITH THE INTERVAC YOU CAN ALSO UTILIZE THE VALVE IN THE DOOR OF THE POWER UNIT TO CLEAN YOUR GARAGE OR CAR USING THE on/off SWITCH.
  • Page 11 D: Closing the Door 1. Take the door and open up the cover for the valve opening. 2. Lift the door parallel with the front of the vacuum. Align the hole in the door with the hole in the bag collar. You have to look through the valve hole and push door in position.
  • Page 12 PART # AS11 " VacPort.com ” for RM Models Elongated Dust Brush Air Turbo Nozzle Model A910 w/o LED light PART # X251 PART # X451 Model A900 with LED light INTERVAC reserves the right to make improvements and modifications without notice.

This manual is also suitable for:

Ivd660-h