InterVac RM-120 Installation And Operating Manual

InterVac RM-120 Installation And Operating Manual

The built-in vacuum system

Advertisement

Quick Links

THE BUILT-IN VACUUM SYSTEM
INSTALLATION AND OPERATING MANUAL
MODEL RM-120 with electric cord
MODEL RMG-120 hard wired, grounded
Important: Instructions must stay with Unit. Owner read carefully.
This manual must be read and understood before installation, adjustment, service or
maintenance is performed. This unit must be installed by a qualified technician.
Modification of this product can be extremely hazardous and could result in
InterVac Design Corp., Palm City, FL 34990
Phone 772-463-1400 • Toll Free 1-888-499-1925
www.intervacdesign.com • e-mail: sales@intervacdesign. com
WARNING:
personal injury or property damage.
1
RECORD THIS INFORMATION FOR
FUTURE REFERENCES
MODEL NUMBER _______________________
DATE OF PURCHASE ___________________
PLACE OF PURCHASE__________________
Manual: #RM120-e Rev. : 9/28/07
Part # W501

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RM-120 and is the answer not in the manual?

Questions and answers

Summary of Contents for InterVac RM-120

  • Page 1 This unit must be installed by a qualified technician. Modification of this product can be extremely hazardous and could result in personal injury or property damage. InterVac Design Corp., Palm City, FL 34990 Phone 772-463-1400 • Toll Free 1-888-499-1925 www.intervacdesign.com • e-mail: sales@intervacdesign. com...
  • Page 2: Important Safety Instructions

    LIMITED WARRANTY InterVac Design Corp. will repair the power unit with new or rebuilt parts, free of charge for six (6) years from the date of original purchase in the event of a defect in materials or workmanship. No cash refunds. Excluded are the following items that require normal replacement: Disposable dust bags, filters, vacuum cleaner tools and vacuum hoses.
  • Page 3: Return Policy

    Carefully pack and send the unit prepaid, adequately insured and preferably in the original carton. Enclose a letter describing the nature of the problem or complaint. InterVac Design will repair or replace your unit. However our policy is, no cash refunds after the 30 days trial period.
  • Page 4 Test unit for proper operation by inserting the end of the vacuum hose into the remote valve. IMPORTANT: If installed during new construction, do not use to clean up building debris. For household use only. Nails and sharp objects can damage your InterVac. Model: RM 120 with electric cord attached, double insulated...
  • Page 5: How To Operate Your Vacuum Cleaner

    # W600 or # W603 surface mounted # W601 or # W602 recessed mounted HOW TO OPERATE YOUR VACUUM CLEANER FOR MODEL RM-120 and RMG-120, REMOTE VALVE UNITS NOTE: THE LOWER PART OF THE VACUUM CLEANER CAN BE QUITE WARM. IF THE VACUUM STOPS RUNNING: THE THERMAL PROTECTOR ON THE MOTOR WILL RESET AUTOMATICALLY AFTER ABOUT 1-1/2 HOUR.
  • Page 6: Trouble Shooting: Tip

    Fig.: E D: Replacing Exhaust Filter, Part #Y41: E: Replacing Motor Filter Pinch exhaust filter in the middle and pull out. Part # Y21 To replace, pinch in the middle and slide in one side first. tuck-in the corners and sides carefully under the ribs TROUBLE SHOOTING: If you use our very convenient stretch hose, but require more suction power, we recommend you try...
  • Page 7 Valve Size: 3-1/2 x 3-1/2 THIS INLET VALVE WITH THE BACKING PLATE IS BASICALLY USED FOR DRY-WALL INSTALLATIONS BUT BECAUSE OF ITS COMPACT SIZE IS ALSO USED IN OTHER APPLICATIONS Valve Size: 3-1/2 x 5-1/4 THE RECTANGULAR VALVE DOES NOT REQUIRE A BACKING PLATE. IT IS FASTER TO INSTALL ESPECIALLY FOR WOOD OR OTHER STABLE SURFACES.
  • Page 8 Air Turbo Nozzle Brush with Charger, PART # A006B for Models RM, RMG Special Inlet Valve "RUG RAT" PART # X453 "VAC-PAN" PART # X452 PART # 505 Black INTERVAC reserves the right to make improvements and modifications without notice.

This manual is also suitable for:

Rmg-120

Table of Contents