APPENDIX ONE - PREVENTIVE MAINTENANCE SCHEDULE
Do not use caustic or abrasive cleaners on this machine.
Never use compressed air to clean dirt or chips from the machine. Air pres-
sure could force dirt particles and other foreign material past seals and wip-
ers.
Maintaining a clean machine is part of any good maintenance program. Machines should be
periodically wiped with lint-free cloths soaked with a good grade of petroleum-based grease solvent.
If the machine is operated in an atmosphere that causes surfaces to rust quickly, wipe these surfaces
with a lint-free cloth soaked in mineral oil.
The following maintenance times are approximate and components may need attention more
frequently if excessive environmental pollution is present. Preventive maintenance frequency is for
single shifts and should be increased proportionally when work is for two or three shifts per day.
8 HOURS
Check coolant level. . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 4
Check coolant concentration . . . . . . . . . . . . . . . . . . . . . . Chapter 4
Measure coolant pH . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter 4
Check chips in coolant reservoir; remove as necessary . . . . . . . . . . Chapter 4
Check hydraulic pressure gauges . . . . . . . . . . . . . . . . . . . . Chapter 5
Check hydraulic fluid level in the tank . . . . . . . . . . . . . . . . . . Chapter 5
Check for hydraulic fluid leaks. . . . . . . . . . . . . . . . . . . . . . Chapter 5
40 HOURS
Clean or replace machine air filters . . . . . . . . . . . . . . . . . . . Chapter 6
Wash the machine and wipe clean . . . . . . . . . . . . . . . . . . . See above
600 Hours
Apply X and Z axis grease lubrication . . . . . . . . . . . . . . . . . . Chapter 2
Apply tailstock grease lubrication . . . . . . . . . . . . . . . . . . . . Chapter 2
M-448B
- CAUTION -
CLEANING THE MACHINE
MAINTENANCE SCHEDULE
A1-1