Using Your Lumea Prestige; Skin Tone Sensor; Attachments - Philips Lumea Prestige BRI959 User Manual

20 English

Using your Lumea Prestige

Skin tone sensor

Attachments

For extra safety, the Lumea Prestige has integrated skin tone sensor which
measures the skin tone at the beginning of each session and occasionally
during the session. If it detects a skin tone that is too dark for treatment
with Lumea, the 'ready to flash' light starts blinking orange and the device
automatically disables to prevent you from developing skin reactions.
This means that it does not flash when you press the flash button.
For optimal results and safety it is important to change attachments per
body area. Lumea Prestige offers full body specific treatment having up to
different tailored attachments.
Note: The device might not work any more and show an error when there is
dirt on the attachment connector. Clean the contact leads when this occurs.
To place the attachment, simply snap it onto the light exit window.
To remove the attachment, pull it off the light exit window.
Body Attachment
The body attachment has the largest treatment window and a curved-in
design to cover effectively and treat areas below the neckline. Especially
large areas such as legs, arms and stomach.
Facial Attachment
The facial attachment has a precise flat design with extra integrated filter
for safe and precise treatment on the sensitive skin on upper lip, chin and
sideburns.
Caution:
- Do not treat your eyebrows with Lumea.
- When you treat the area above your upper lip, be careful that you do
not flash on the lip.
Armpit attachment (BRI956, BRI959)
The armpit attachment has a specifically curved-out design to treat hard to
reach armpit hairs.