Table of Contents
Advertisement
GB
3.3
Assembly of the wall panels
Clean the interior flooring panel in the area of the interior
wall plating C with isopropanol. Adhere the enclosed sealing
gasket (D) to the cleaned edge of the interior flooring plate.
Remove the protective foil from the sealing gasket.
Begin the wall assembly with the corner panels. Connect the
panels using the cam locks.
3.4
Assembly of the door
The one piece door is supplied complete with the door
frame.
During assembly ensure that the doorframe is installed
perfectly horizontally and vertically (plumb Iine).
3.5
Assembly of the ceiling panels
When installing a wall-hanging unit, it must be hung on the
side section of the door frame or on the wall before
installing the ceiling elements. During installation ensure
that the evaporator fan does not blow onto the door leaf and
the pressure compensation valve.
Place the ceiling panels in position and tighten the cam
locks.
Note!
lf the panels are uneven, release the cam locks and adjust
the panels. Tighten all cam locks (wall/ceiling, wall/wall,
wall/floor) again.
3.6
Assembly of the door threshold
Place the stainless steel door threshold (G) in the middle of
the door opening and adjust. Drill holes for fastening of the
door threshold (ø 3.3 mm)
Do not drill extra holes due to possible heating
cable underneath. Danger to life!
In order to seal the threshold securely against penetrating
damp, apply a bead of polyurethane sealant (L) to the front
of the door sill at the bottom, on the inside and on the sides.
Place door threshold plate on the flooring panel, adjust and
rivet in place using enclosed rivets.
Seal the threshold with PU sealant on the sides of the door
opening and to the floor.
Smooth off excessive sealant.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page 8 GB
D
Montage Wand - Ceiling
Montage Türschwelle
Right reserved to make technical changes!
C
Advertisement
Table of Contents
