Conduct each adjustment in accordance with the adjustment software instructions on PC screen.
1.Adjustment for temperature detection voltage
2.AE adjustment
3.Aperture adjustment
4.M1/ 4000 adjustment
5.TTL adjustment
AF ADJUSTMENT
Note: When using this adjustment software for the first time, prepare 5 units of D100 cameras to measure and
obtain the average value of them at the AF accuracy inspection.
Then input the average value of these measured 5 units in "WRITING OF AF ADJ. LENS OFFSET
VALE" in the main menu.
*If there is lens data for adjustment of F65, it is possible to make a file for D100 from the file for F65 at
"WRITING OF AF ADJ. LENS OFFSET VALUE" in the menu of adjustment software.
〔Inspection and adjustment items〕
① Inspection and adjustment for the AF accuracy(whole item shall be adjusted)
② YAW, PITCH
③ LARK adjustment
〔Tools in use〕
1.For adjustment of whole item:
The tool(s) used for the AE-oriented adjustment shall be utilized.
2.For check of the AF accuracy
① Z adjustment lens(J18266)for F5, F100
② AF adjustment stand(J15259)
③ Z lens holder(J15280)or position conversion adapter(J15271)for tripod socket
④ AF chart(J18344) for D100
⑤ Lighting box(J15264)for high frequency
3.For adjustment of YAW, and PITCH
① The whole tool used for the check of AF accuracy just as mentioned above
② Adjustment tool for YAW, and PITCH(J18230)
4.For adjustment of LARK
The whole tool used for the check of AF accuracy just as mentioned above
5.For adjustment of CCD output
AF50/1.4D lens
After the adjustment, insert the FPC used for communication into the 2 holes.
●
2 holes
- A31 ・
-
VBA10201-R.3577.A