Philips 240S4LPMS/00 Service Manual page 72

Meridian 3
72
DVI Cable
The input signals are applied to the display through DVI-D cable.
Length
Connector type
Pin Assignment:
DP CABLE
The input signals are applied to the display through DP cable.
Length
Pin Assignment:
: 1.8 M +/- 50 mm
: DVI-D male with DDC-2B pin assignments
Pin No.
1 T.M.D.S. data2-
2 T.M.D.S. data2+
3 T.M.D.S. data2 shield
4 No Connect
5 No Connect
6 DDC clock
7 DDC data
8 No Connect
9 T.M.D.S. data1-
10 T.M.D.S. data1+
11 T.M.D.S. data1 shield
12 No Connect
13 No Connect
14 +5V Power
15 Ground (for +5V)
16 Hot plug detect
17 T.M.D.S. data0-
18 T.M.D.S. data0+
19 T.M.D.S. data0 shield
20 No Connect
21 No Connect
22 T.M.D.S clock shield
23 T.M.D.S. clock+
24 T.M.D.S. clock-
: 1.8 M +/- 50 mm
Connector type
PIN No.
1 ML_Lane 3(n)
2 Ground
3 ML_Lane 3(p)
4 ML_Lane 2(n)
5 Ground
6 ML_Lane 2(p)
7 ML_Lane 1(n)
8 Ground
9 ML_Lane 1(p)
10 ML_Lane 0(n)
11 Ground
12 ML_Lane 0(p)
White connector thumb-operated jackscrews
With transplant pin protective cover.
Description
: DP male with DDC-2B pin assignments
White connector thumb-operated jackscrews
With transplant pin protective cover.
SIGNAL