Information Screen Display; Charging System Warning Light - Mitsubishi MOTORS Lancer 2017 Owner's Manual

Table of Contents

Advertisement

CAUTION
 Driving for a long time with the engine mal-
function indicator on may cause more dam-
age to the emission control system. This
could also affect fuel economy and drivabil-
ity.
 If this indicator does not come on when the
ignition key is turned to the "ON" position,
have the system checked at an authorized
Mitsubishi Motors dealer or a repair facility
of your choice.
 If the engine malfunction indicator comes on
while the engine is running, avoid driving at
high speeds.
During vehicle operation with the indicator
on, the vehicle may not accelerate when you
depress the accelerator pedal.
When the vehicle is stationary with the indi-
cator on, you must depress the brake pedal
more firmly than usual since the engine
idling speed is higher than usual and a vehi-
cle with a CVT has a stronger tendency to
creep forward.
NOTE
 Do not disconnect the battery cable when the
engine malfunction indicator ("SERVICE
ENGINE SOON" or "Check engine light") is
on.
The engine electronic control module stores
critical OBD information (especially exhaust
emission data), which may be lost if the bat-
tery cable is disconnected while the engine
malfunction indicator is on. This will make it
difficult to diagnose the cause of future prob-
lems.

Charging system warning light

This light comes on in the event of a malfunc-
tion in the charging system or when the igni-
tion switch is turned to the "ON" position
(engine off). A warning is also displayed in
the multi-information display. When the
engine is started, the light should go out.
Check to make sure that the light has gone
out before driving.
CAUTION
 If the warning light stays on while the engine
is running, park your vehicle in a safe place
as soon as possible and contact an authorized
Mitsubishi Motors dealer or a repair facility
of your choice to have the system checked.

Information screen display

Information screen display
Brake warning display
Type 1
Type 2
N00520600296
This warning is displayed if the vehicle is
being driven with the parking brake still
applied. The warning light in the instrument
cluster only comes on when the parking brake
is applied.
CAUTION
 If a vehicle is driven without releasing the
parking brake, the brakes will overheat,
resulting in ineffective braking and possible
brake failure.
If this warning is displayed while driving,
release the parking brake.
Features and controls
N00558300025
N00558400084
5
5-125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents