Installing Batteries In Transmitter; Installing Batteries In Monitor; Operation - Brookstone GRILL ALERT User Manual

330654INS grill alert 3/22/02

INSTALLING BATTERIES IN TRANSMITTER

1. Slide open the battery compartment.
2. Insert two AAA batteries following the polarities as indicated inside.
3. Replace cover.
4. Press reset button.
NOTE: Transmitter and monitor need to be reset within 60 seconds of each other to synchronize units and establish a signal.

INSTALLING BATTERIES IN MONITOR

1. Slide open the battery compartment.
2. Insert two AA batteries following the polarities as indicated inside.
3. Replace cover.
4. Press reset button.
NOTE: Transmitter and monitor need to be reset within 60 seconds of each other to synchronize units and establish a signal.
OPERATING YOUR GRILL ALERT
1. Connect meat probe to transmitter by inserting F into C.
2. Turn on the transmitter by pressing and holding the power button for two seconds (light flashes).
3. Turn on the monitor by pressing and holding the power button for two seconds.
4. Select the meat you are cooking by pressing the entree selector until your desired setting appears on the display:
BEEF, LAMB, VEAL, HAMBURGER, PORK, TURKEY, CHICKEN and FISH.
5. Choose your preferred doneness level by pressing the entree selector until your desired setting appears on the display:
RARE, MEDIUM RARE, MEDIUM and WELL DONE.
4:24 PM Page 6
5