Related Manuals for Uniden R3
Summary of Contents for Uniden R3
- Page 1 LONG RANGE Radar/Laser Detector User’s Manual © 2017 Uniden America Corporation Issue 1, May 2017 Irving, Texas Printed in Korea...
-
Page 2: Customer Care
Uniden expects consumer’s use of these products to be in compliance with all local, state, and federal law. Uniden expressly disclaims any liability arising out of or related to your use of this product. -
Page 3: Table Of Contents
CONTENTS CUSTOMER CARE ............................2 R3 OVERVIEW ....................5 FEATURES ..............................5 INSTALL AND TURN ON R3 ................6 INSTALL/POWER ON ..........................6 Windshield ............................... 6 Dashboard ..............................6 WHAT’S IN THE BOX ..................6 PARTS OF THE R3 ...................7 NON-KEY ELEMENTS ..........................8 CHARGER .............................. -
Page 5: R3 Overview
USER’S MANUAL R3 OVERVIEW Uniden's R3 is a top of the line Radar Detector with a built-in GPS feature. With the R3, you can mark geographical points where you commonly encounter radar transmissions. These can be school zones, red-light cameras, and places where police frequently monitor traffic. You can mark these points so the detector will announce “User mark ahead”... -
Page 6: Install And Turn On R3
INSTALL AND TURN ON R3 You can mount the R3 on the windshield (1- and 2- cup suction brackets included) or on the dashboard (hook and loop tape included). INSTALL/POWER ON Windshield When you mount the R3 on the windshield, mount it in the middle of the windshield between the driver and passenger. -
Page 7: Parts Of The R3
MUTE/DIM again while Mute On displays to save that GPS location and frequency to memory. Mute Memory displays on the screen. R3 stores up to 100 Mute Memory points. • Delete Mute Memory - Press MUTE/DIM while Mute Memory displays; the R3 displays a delete confirmation message. -
Page 8: Non-Key Elements
• Press the mute button to mute an alarm. Returns to normal operation 10 seconds after the alert ends or if a different band is detected during Mute mode. Mute On displays on the R3 for a few seconds. • Save a Mute location (Mute Memory) - press the mute button again while Mute On displays on the R3 to save that GPS location and frequency to memory. -
Page 9: Lcd Display
LCD DISPLAY The LCD display on the front of the unit changes depending on what events are happening. If GPS = Off, the LCD's left display area shows Volt regardless of user settings. The following table provides examples of the most common displays: LCD EXAMPLES MEANING Scanning for Frequencies... - Page 10 Press MENU to access the Menu system. The screen displays the selection’s current status. For example, if you press MENU and the screen displays Voice: ON, you have the option of turning Voice to OFF. Use the following keys to navigate the menus: x MENU: Change a menu item setting (press and hold to exit the Menu system).
- Page 11 Grey Scan Search for frequencies. (GPS on) Off (Default) When Scan is off, time displays. R3 receives time from setting GMT and Daylight Savings time in the menus. Display Lets you select various attributes to display on the Speed (Default) LCD.
-
Page 12: Basic Operations
Sounds a warning tone if the vehicle battery power drops below 11V. Off (Default) BAT Saver Turns off power to the R3 if the speed stays at 0 or if the GPS is not connected for more than an hour. (GPS on) Off (Default) -
Page 13: Feature Details
POP MODE In POP mode, the R3 can detect short burst from radars that are too fast for many other detectors to catch. You can turn POP mode on and off in the Menu system. ALARM PRIORITIES... -
Page 14: Threat
THREAT The R3 detects up to 4 radar band signals (threats) at a single time. The strongest rader signal is designated as the Priority signal, and its frequency displays on the LCD. The other signals (threats) are indicated in the left side of the display. -
Page 15: User Speed Limit
USER SPEED LIMIT When you set a speed limit thorough the menus, the R3 sends an alarm tone if your speed exceeds that speed limit setting. If that happens, the unit announces and displays over speed warnings. QUIET RIDE This function mutes X and K band radar alarms to zero volume when you drive under a speed... -
Page 16: Fcc/Ic Compliance
(D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operating Guide for this product. - Page 17 The Product should be shipped freight prepaid, by traceable means, or delivered, to warrantor at: Uniden America Corporation C/O Saddle Creek 743 Henrietta Creek Rd., Suite 100 Roanoke, TX 76262 POP Mode is a trademark of MPH Industries, Inc.
Need help?
Do you have a question about the R3 and is the answer not in the manual?
Questions and answers