Binatone DT820N Quick Installation Manual page 3

the other end to the MODEM port of the external
splitter.
b. Connect the Ethernet cable. Attach one end of a
network cable to your computer's Ethernet port or a
regular hub/switch port, and the other end to the LAN
port on the DT820N.
c. Attach the power adapter. Connect the power adapter
to the POWER connector on the rear of the device
and plug in the adapter to a wall outlet or power
extension.
d. Turn on the DT820N and power on the computers and
LAN devices.
Figure 1
2