Number Of Rings - AT&T CL83107 Complete User's Manual

Answering system
Answering system settings

Number of rings

to check for new messages and avoid paying long distance charges when
calling from out of your local area. By default, the answering system answers an
To set the number of rings:
Using a cordless handset or the telephone base:
1. When the handset or telephone base is in idle mode, press
MENU/
SELECT
2. Press or
CID
/SELECT.
MENU
3. Press or
CID
/SELECT.
MENU
4. Press or
CID
/SELECT.
MENU
5. Press or
CID
Toll saver.
6. Press /SELECT to save the setting. You hear a
MENU
Notes:
If you subscribe to voicemail service through your telephone service provider, see Answering system and voicemail
indicators on page 121.
If you set the number of rings for the answering system as two or three rings, the caller ID announce feature may not
have enough time to announce the caller's full information.
If you have muted the first ring, you will hear one ring less before the answering system answers the incoming
calls.
to enter the main menu.
to scroll to Answering sys, then press
DIR
to scroll to Ans sys setup, then press
DIR
to scroll to # of rings, then press
DIR
to choose among 2, 3, 4, 5, 6 or
DIR
114
Call screening
># of rings
# OF RINGS
>4
Call screening
># of rings
# OF RINGS
>4