About This Guide; Important Terms; Conventions - Colubris Networks WCB-200 Admin Manual

WCB-200 Admin Guide

About this guide

This guide explains how to install, configure, and operate the Colubris Networks WCB-200
(wireless client bridge) product.

Important terms

The following terms are used in this guide.
Term
AP
Service controller
COS

Conventions

This guide uses specific syntax when directing you to interact with the management tool user
interface. Refer to this image for identification of key user-interface elements and then the table
below showing example instructions:
Example directions in this guide
Select Wireless > Radio
For Password specify secret22.
WARNING:
Warnings must be heeded to avoid death or physical injury and to avoid
hardware damage.
Caution: Cautions must be heeded to avoid loss of data or configuration
information and to avoid improperly-configured networks.
6
Description
Refers to access points including the Colubris MultiService Access Points
such as the MAP-630, MAP-320, and MAP-330.
Refers to the Colubris MSC-5000 and MSC-3000 series of controllers.
Colubris devices such as the WCB run the Colubris Operating System
(COS). References to specific versions of COS are made in the form "at
COS x.x" as in "WCB-200 at COS 5.2."
What to do in the user interface
On the main menu select Wireless and
then select Radio on the sub-menu.
In the field Password enter the text
secret22 exactly as shown.
1 Introduction