Table of Contents
Advertisement
WCB-200 Admin Guide
Installation
WARNING:
SURGE PROTECTION AND GROUNDING: If you plan on connecting an
outdoor antenna to the WCB-200 make sure that proper lightning surge
protection and grounding precautions are taken according to local electrical
code. Failure to do so may result in personal injury, fire, equipment damage,
or a voided warranty.
When mounting the WCB-200 on a wall or ceiling, ensure that the surface to which you attach the
WCB-200 and the fasteners you use can support at least .9 kg (2 pounds). Allow extra weight for
cables.
If needed, insert the spring clip into one of the screw holes in the mounting bracket as shown to
provide a tighter fit.
If the WCB-200 is installed inside a plenum, plenum-rated cables and attachment hardware must
be used. Only the WCB-200 and appropriate cabling can be located in the plenum.
Caution:
Power supplies and PoE injectors available separately from Colubris
Networks cannot be installed inside a plenum.
14
2 WCB-200 hardware
Advertisement
Table of Contents
Need help?
Do you have a question about the WCB-200 and is the answer not in the manual?