Axis M3044-V User Manual page 11

AXIS M30 Network Camera Series
Setup
Note
Increasing the max shutter value can result in motion blur.
• The shutter speed should be as slow as possible, which means you should set max shutter to the highest possible value.
• Reduce sharpness in the image.
• Try lowering the max gain value.
How to handle scenes with strong backlight
Use WDR to make both dark and bright areas of the image visible.
1. Go to Settings > Image.
2. Turn on WDR under Wide dynamic range.
Image without WDR.
Image with WDR.
Note
If you use WDR, you may experience some WDR artifacts in the image.
Find out more about WDR and how to use it at axis.com/web-articles/wdr
How to maximize details in an image
Important
If you maximize details in an image, bitrate increases and might lead to reduced frame rate.
• Make sure to select capture mode that has the highest resolution.
11