VTech DS6621 Abridged User Manual page 9

Use this feature to find all system handsets.
• Press
display .
• Press
• Press ,
• Place the handset in the telephone base or charger.
Do not press and hold
handset deregistration.
Each handset stores the last 10 telephone numbers dialed. When there are
already 10 entries, the oldest entry is deleted to make room for the new entry.
1. Press when the handset is not in use.
2. Press , , or
3. Press ,
When the desired redial entry displays, press
You can use up to two system handsets at a time on a home line call. You can buy
additional expansion handsets (
up to five handsets to the telephone base.
• When a handset is on a home call, press
join the call.
• Press to exit the call. The call continues until all handsets hang up.
Use the intercom features for conversations between two devices.
1. Press on your handset when not in use.
2. Press or to scroll to
keys to enter a destination device number.
3. To answer the intercom call, press
on the destination handset.
4. To end the intercom call, press
base or charger.
While on an outside call, you can use the intercom feature to transfer the call from
one handset to another.
1. Press on your handset during a call.
2. Press or to scroll to
put on hold. Use the dialing keys to enter a destination device number.
3. To answer the intercom call, press
on the destination handset. You can now have a private conservation before
transferring the call.
4. To transfer the call, press
handset back in the telephone base or charger.
5. To end the call, press
handset back in the telephone base or charger.
If you receive an incoming call during an intercom call, there is an alert tone.
• To answer a home call, press
• To end the intercom call without answering the outside call, press
intercom call ends and the telephone continues to ring.
• To answer a cell call, press
continues to ring. Then press
The phonebook can store up to 1000 entries and are shared by all system handsets.
1. Press when the phone is not in use.
2. Scroll to then press
3. Press again to choose
4. Enter the number.
• Use the dialing keys to enter the number (up to 30 digits).
5. Press to move to the name.
6. Use the dialing keys to enter the name (up to 15 characters). Additional key presses
show other characters of that particular key.
7. Press to save.
on the telephone base. All idle handsets ring and
again on the telephone base.
, , , or any dialing key on the handset.
for more than four seconds. It may lead to
repeatedly until the desired entry displays.
, or to dial.
) for this telephone base. You can register
or
, and then press
,
or place the handset back in the telephone
, and then press
,
on the initiating handset or place the initiating
on the destination handset or place the destination
. The intercom call ends automatically.
to end the intercom call. The telephone
.
.
.
9
.
on another handset to
. Use the dialing
, , or any dialing key
. The current call is
, , or any dialing key
. The