VTech DS6621 Abridged User Manual page 7

1. Press on the phone when it is not in use.
2. Press or to scroll to
3. Press or to scroll to
screen displays
4. Set your headset to discoverable mode. Once your handset finds your
headset, press
• Enter the PIN of your headset if required. The PIN for most Bluetooth devices
is (refer to the user's manual of your headset), and then press
When the headset is successfully paired and connected to the telephone base, the
icon displays. The
This application helps you integrate your Android phones with your
For more information and application download, go to
1. Press when the phone is not in use.
2. Scroll to , and then press
3. Scroll to
4. Scroll to select the desired cell phone, and then press
• For certain cell phones, you may need to press a key on your cell phone to
confirm the phonebook download.
• The performance of phonebook download feature depends on the compatibility of
your Bluetooth cell phone. Refer to the user's manual of your cell phone for more
information about how that device uses Bluetooth connectivity.
• Certain cell phones do not support SIM card download. If this is the case, transfer the
contacts from your SIM card to your cell phone memory first. Then download from
your cell phone memory. For more information on how to transfer contacts from
your SIM card to your cell phone memory, see the user's manual of your cell phone.
• For Android cell phones, you may also download your cell phone
contactsto your
Scan the QR code on the right, or go to
1. Press when the phone is not in use.
2. Press or until the screen displays the desired feature menu.
3. Press to enter that menu.
• To return to the previous menu, press
• To return to idle mode, press and hold
Default settings are indicated by asterisks(*).
Set the screen display language.
Save the speed dial voicemail number to 1
Turn off the voicemail indicators (see the note below).
Turn an audible beep on or off whenever a key
is pressed.
Enter your home area code if you dial only
seven digits for local calls.
Set the telephone to be touch-tone or
pulse dialing.
Use the
but there is none. For example, when you have accessed your voicemail while away
from home. The
your voicemail messages. As long as you have new voicemail messages, your
telephone service provider continues to send the signal that turns on the indicators.
The following are some of the telephone features you may wish to set.
You can adjust the ringer volume level, or turn the ringer off.
1. Press when the handset is not in use.
2. Scroll to , and then press
3. Scroll to choose
4. Press or to adjust the volume, and then press
If the handset ringer volume is set to off, that handset is silenced for all incoming
calls except paging tone.
, and then press
, and then press
.
light turns on.
.
, and then press .
via the VTech Contact Share application.
for application download.
.
.
feature when the telephone indicates there is new voicemail
feature only turns off the indicators; it does not delete
.
or , and then press
7
.
. The
.
.
.
ñ
.
.
to save.