Functional Overview - Philips SV1 User Manual

Menu 1
OK 2
Cursor Control 3
Auto Image 4
Standby/
Standby indicator 5
Temperature indicator 6
Lamp indicator 7
Source 8
Zoom Ring 9
Focus Ring 0
Philips Multimedia Projector

2. Functional overview

1 2
Menu Menu OK OK
Source Source Auto Image Auto Image
8
^
Lamp Lamp Temp. Temp.
7 6
$
To activate and deactivate the menu.
To confirm actions in the menu when the menu is on screen.
When the menu is active, use the Cursor to navigate through the OSD menu.The Cursor
works with up/down and left/right button operation.
To automatically adjust frequency, tracking, horizontal and vertical position.
With most signal sources, Auto Image provides the best results.
To turn the projector on or off.
The Standby indicator (text on button/ring around button):
In Power on mode:
– the light blinks green when the projector is warming up;
– light is green when the projector is on.;
In Power off mode:
– light is red when the projector is off. (Standby);
– the light blinks red when the projector is cooling down.
Light turns red when there is a temperature problem.
– Fast blinks red (0.5 sec On, 0.5 sec Off) when lamp start has failed.
– Fast blinks red (1 sec On, 1 sec Off) in case of fan error.
To select the current projection source (Computer,YPbPr,YCbCr, RGBS, S-Video or Video).The
button toggles between the six signals.
To adjust the size of the image.
To adjust the focus of the image.
6
3
4
%
5
0 9
@ #
Controls
!
English User guide bCool SV1
>