Audio Control - Philips ProScreen PXG20 User Manual

8. OPERATION
Selecting signal type
This function allows you to select the input signal type
(Computer/RGB or Component) for Data in 1 or 2 port.
1. Press Menu.
2. Press 1 / 2 to select 'Picture'.
3. Press 3 / 4 to select 'Signal Type', and then press 2.
4. Press 3 / 4 to select 'Computer/RGB' or 'Component'.
5. Press OK to save the setting.
6. To exit from the GUI, press Menu.
Interlaced (I)/Progressive (P) conversion
This function allows you to select either an interlaced display
or a progressive display of a video signal. The progressive
display projects a smooth video image.
1. Press Menu.
2. Press 1 / 2 to select 'Picture'.
3. Press 3 / 4 to select 'I/P Conversion', and then press 2.
4. Press 3 / 4 to select 'Interlaced' or 'Progressive'.
5. Press OK to save the setting.
6. To exit from the GUI, press Menu.
Interlaced mode
Interlaced mode creates a single image through the activation
of scanning lines in two fields. Use this mode when projecting
moving images
Progressive mode
Progressive mode creates a single image using all available
scanning lines. Use this mode when projecting still images to
avoid flicker and stripes that result from interlaced source still
images.
20
Picture control/Audio control

AUDIO CONTROL

This projector's audio is factory preset to standard settings.
However, you can adjust it to suit your own preferences by
adjusting the following audio settings.
– Volume – adjusts audio level;
– Balance – adjusts audio level of left and right speaker;
– Treble – adjusts the high tones;
– Bass – adjusts the bass tones;
– Reset – All audio adjustment items are returned to the
factory preset settings.
1. Press Menu. Menu bar and 'Picture' menu screen appear.
GUI operation guide is also displayed.
2. Press 1 / 2 to select 'Audio'.
3. Press 3 / 4 to select a specific adjustment item.
4. Press 1 / 2 to move the mark of the selected adjustment
item to the desired setting.
5. To exit from the GUI, press Menu.
– To reset all adjustment items, select 'Reset' on the 'Audio'
menu screen and press OK.
– The volume can also be adjusted with the '–' Volume '+'
buttons on the projector.
Notes: