Security Menu - ECS Z270-LIGHTSABER User Manual

Security Menu

This page enables you to set setup administrator password and user password.
Main Advanced
Administrator Password
Administrator Password Status
User Password Status
System Mode state
Secure Boot state
Secure Boot
Secure Boot Mode
Administrator Password Status (Not Install)
This item shows administrator password installed or not.
User Password Status (Not Install)
This item shows user password installed or not.
System Mode state (Setup)
This item shows system mode setup or not.
Secure Boot state (Not Active)
This item allows you to enable or disable the secure boot state.
Secure Boot (Enabled)
This item is used to control the secure boot flow, it is possible only if system runs in
User Mode.
Secure Boot Mode (Standard)
This item is used to select secure boot mode, when you select standard mode, secure
boot policy is fixed; when you select custom mode, the image execution policy and
secure boot key databases are changeable.
Z270-LIGHTSABER USER MANUAL
Chipset M.I.B. X
Not Install
Not Install
Setup
Not Active
Enabled
Standard
Security Boot
Set Administrator Password
: Select Screen


/Click: Select Item
Enter/Dbl Click : Select
+/- : Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Exit
65