ECS Z270-LIGHTSABER User Manual page 10

Internal I/O • 1 x 24-pin ATX Power Supply connector
Connectors & • 1 x 8-pin ATX 12V Power connector
Headers • 2 x 4-pin CPUFAN connectors
• 2 x 4-pin SYSFAN connectors
• 1 x 4-pin PWRFAN connector
• 1 x 5-pin USB 2.0 header supports additional one USB 2.0 port
• 1 x 2*5 pin USB 2.0 header supports additional two USB 2.0
ports
• 1 x USB 3.0 header supports additional two USB 3.0 ports
(supports EZ charger)
• 6 x SATA 6Gb/s connectors
• 1 x U.2 connector (PCIEx4 Signal only)
• 1 x 80 Port switch button
• 1 x Debug POST LEDs
• 1 x Reset button
• 1 x Power on button
• 1 x ROM backup button
• 1 x BIOS updat button
• 1 x BIOS set button
• 1 x Quick OC button
• 1 x Front Panel switch/LED header
• 1 x Case open header
• 1 x Buzzer header
• 1 x Front Panel audio header
• 1 x SPIROM Switch
System BIOS • AMI BIOS with 64Mb SPI Flash ROM
• Supports Plug and Play, STR (S3)/ STD(S4), Hardware Monitor
• Supports ACPI & DMI
• Audio, LAN, can be disabled in BIOS
• F7 hot key for boot up devices option
• Supports Over-Clocking
• Supports PgUp clear CMOS Hotkey (Has PS2 KB Model only)
• Add the function of copying BIOS parameters to USB flash drive
Bundled
• ECS Exclusive AP:
Software
Note: *Microsoft.NET Framework 4.5 is required.
Support
Form Factor • ATX Size, 305mm x 244mm
Z270-LIGHTSABER USER MANUAL
eBLU*/eDLU/eSF*
3