Dongles; Passive Single-Link Dongle - Barco MXRT-1450 User Manual

IO-Panel for the Barco MXRT-5600, MXRT-7500 & MXRT-7600
Image 2-8
MXRT-5600, MXRT-7500 & MXRT-7600
DisplayPort #1
1
DisplayPort #2
2
DisplayPort #3
3
DisplayPort #4
4
For displays with native DisplayPort input, use a native DisplayPort cable to connect the DisplayPort output
of the Display Controller to the DisplayPort input of the display. You cannot connect the DVI output of a
Display Controller to the DisplayPort input of a display.
2.5

Dongles

About
Barco dongles are designed to allow Barco Display Controllers with a DisplayPort connector to a display
with only a DVI input. Most current Barco displays support direct DisplayPort connection.
If video cable conversion is not required, you may bypass this section.
Barco dongles are available for purchase independently.
2.5.1

Passive Single-Link Dongle

About
The passive Single-Link Dongle converts DisplayPort input signals to single-link DVI output signals. It is
compatible with all Barco grayscale displays and up to 2MP color models. For color displays of 3MP and
greater resolutions, the Dual-Link Dongle is necessary.
Image 2-9
Single-Link dongle
1 To display Single-Link DVI cable
2 To DisplayPort connector on Barco Display Controller
K5905271 DISPLAY CONTROLLER 27/02/2017
2. Display Controller installation
9