Using The Mixed Batch Card Guide - Panasonic KV-Sl3066 Operating Manual

6.4.3 Mixed Batch Card Guide (ADF)
4.
Attach the feed tray ( ) to the unit.

6.4.3.3 Using the Mixed Batch Card Guide

Set paper documents on the feed tray, and a card on the mixed batch card guide respectively.
•
The card set on the mixed batch card guide is fed after completing the paper document scanning.
•
The mixed batch card guide is suitable for the following card type.
ISO format card:
Size:
Thickness:
•
Set the card in landscape orientation.
•
A maximum of 3 cards can be set in the mixed batch card guide.
•
Ensure that the embossed portions of cards do not stick together.
•
If acceptable results cannot be obtained, try changing the scanning orientation or reversing the scan face
of the card, and then perform scanning again.
Note
•
When using the mixed batch card guide, the document guides cannot be adjusted to less than A5
size.
•
Make sure that the total height of the paper on the feed tray does not exceed 2 mm (0.08 in.). (This is
equivalent to about 20 sheets at 80 g/m² [21 lb.].)
42
1
85.6 mm × 54 mm (3.4 in. × 2.1 in.)
0.76 mm (0.03 in.)
Embossed card up to 1.4 mm (0.055 in.)