Philips DTR2610/28 User Manual page 6

9
Next, highlight the country where you operate the
receiver by pressing V or W, and then press OK.
You are prompted to confirm your choice by pressing OK
again.
10
The next screen is used to select both the TV screen
format corresponding to your TV set and update mode.
Highlight the appropriate format by pressing C or B,
then move to the update mode selection using V or W,
and highlight Yes to allow for automatic software update.
Alternatively, highlight No if you prefer to be notified
when software update is available. Press OK to initiate
the channel search.
11
Once it has been completed, the receiver tunes to the
first found TV channel.
Now you are ready to enjoy viewing digital terrestrial TV.
Refer to chapter 5 and 6 to learn more about using your
receiver.
I N S TA L L AT I O N G U I D E 5