Philips DTR2610/28 User Manual page 5

4 I N S TA L L AT I O N G U I D E
The smart card golden or silver contacts must
be facing up at card insertion.
When this crossed-out wheeled bin symbol is
attached to a product or its packaging, it
means the product is covered by the
European Directive 2002/96/EC.
Please inform yourself about the local separate collection
system for electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal household
waste. The correct disposal of your old product will help
prevent potential negative consequence for the
environment and human health.
1
Disconnect your TV set and recorder from the mains.
2
Integrate your receiver in your existing installation as
shown on the above diagram.
3
Insert the two batteries supplied in your remote control.
4
Reconnect your TV set and recorder to the mains. Do
not connect your receiver to the mains yet!
5
Switch on your TV set and select a channel.
6
Plug the receiver's power supply cord to the mains. The
receiver front panel green LED gets on.
7
Now you should see the Welcome screen on your TV
screen. After a few seconds, the Welcome screen
disappears.
8
Then, a screen appears, that allows you to select the
language. Highlight the desired language by pressing V or
W, and then press OK.
You are prompted to confirm your choice by pressing OK
again.