Dhcp Server; Dynamic Pool Settings - D-Link DAP-1353 User Manual

Section 3 - Configuration
network. A Dynamic Pool allows wireless stations
needed or required in the network, the DAP-1353 is
Function Enable/
Disable: assigns dynamic IP addresses to devices on
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign new IP addresses.
Select Enable to allow the DAP-1353 to function
as a DHCP server.
IP Assigned
on your network.
From:
The Range of
Pool (1-254):
Subnet Mask:
Gateway:
Enter the IP address of the gateway on the network.
WINS:
determines the IP address of a network computer that has a dynamically assigned IP address.
D-Link DAP-1353 User Manual

DHCP Server

Dynamic Pool Settings

39