Advertisement
Remote Control
1. Stand by On: To switch the projector in or out of the Power/Standby mode.
2. Mouse Left/Right: Function as the Left and Right mouse keys of your pc when USB or
PS/2 connection has been made.
3. -Volume+: To adjust the volume.
4. Menu: To activate and de-activate the menu.
5. Source: To select the current projection source (Computer, Component, RGBS, S-Video,
Video). The button toggles between the five signals.
6. D-Freeze: To capture a (moving) picture. The button toggles between the Freeze mode
and the display situation.
7. D-Zoom: To switch the 'Digital Zoom' function 'On' or 'Off' (toggle button). In 'On'
condition, the zoom center can be selected using Cursor Control and the image is
magnified with the zoom factor chosen under 'Magnification'.
8. A/V Mute: To mute the sound of the projector and to mute the picture.
9. Cursor Control: To manipulate the mouse cursor on the connected computer as long as
the menu is not active. When the menu is active the Cursor Control controls the menu
cursor to navigate through the OSD menu. The cursor control works with up/down and
left/right button operation. The Cursor Control can only function as a mouse cursor when
projector and computer are connected via the USB or PS/2 connectors.
10. OK: To confirm actions in the menu when the menu is on screen.
12. Laser: To activate the laser pointer to indicate items on the screen. The laser pointer
sends out a laser beam. Do not look into this beam!
13. Laser Point: Exit point of laser pointer.
Advertisement
