Philips 64PH9905 Instructions For Use Manual page 9

NTSC/A
RED/BLUE CONVERGENCE
C onvergence is the correct
lining up of the red and blue
light paths on the DPTV screen.
NOTE: If no color fringing (see
Smart Help) shows, then no
Convergence adjustments are
necessary.
BEGIN
1
Select CONVERGENCE
control.
With PICTURE MENU (2 of 2)
on-screen, move the RED highlight
with the MENU buttons. Then
press the MENU button.
2
Press the MENU
to select either the Red or Blue
Convergence control, press the
MENU button to continue.
3
Press the MENU
to move the selected red (or blue)
convergence cross directly over the
white cross on the DPTV screen.
The red (or blue) cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge of
the white cross).
4
Press the "exit" button to clear
the screen when convergence
adjustments are complete.
STOP
S H
MART ELP
Remember, Convergence
has been set at the factory for
best viewing, but if one or more of
the (red or blue) colors appear
around the edges of objects (color
fringing) follow the steps given in
this section.
P
NALOG ICTURE
NTSC NTSC
ANALOG MAIN MENU
PICTURE
FEATURES
1ST TIME SETUP
2
buttons 1
menu
buttons
exit
3/3 Analog
4
NOTE: Adjustments for "Multi-Point" on-
screen color fringing can also be made as part
of the DPTV's Convergence control system.
Follow the on screen menu directions to
select individual screen areas that can be
readjusted and set for varying red/blue color
fringing conditions. These multi-point
settings can then be "Saved" to memory for
the specific areas of the DPTV screen (or
Factory Settings for convergence can be
recalled and put back into place for use).
M C
ENU ONTROLS
SOUND
EXIT
mute
channel
2
DTV
+ +
volume
+ +
ok
2
1
DTV
3
CONVERGENCE MULTI POINT
CONVERGE RED POINTS
CONVERGE BLUE POINTS
RESTORE FACTORY SETTINGS
SAVE ADJUSTMENTS
BACK
9
PICTURE MENU
COLOR
BRIGHT PICTURE
SHARP CLEARVIEW
MORE...
EXIT
1 OF 2
PICTURE MENU
CONVERGENCE
VIDEO ENHANCEMENT
EXIT MORE...
2 OF 2
CONVERGENCE MENU
ALIGN RED
ALIGN BLUE
CONVERGE MULTI POINT
BACK
PRESS TO ALIGN RED
PRESS MENU TO RETURN
MULTI-POINT CONVERGENCE CONTROLS
CONVERGE RED POINTS
USE TO ADJUST
DIGIT 2, 4, 6, 8 TO MOVE CURSOR
MENU TO RETURN
PRESS MENU NOW TO CONTINUE
MAIN MENU
PICTURE SOUND
FEATURES
1ST TIME SETUP EXIT
TINT